Free shipping on orders $199 & over!

Free shipping on orders $199 & over!

AGM Asp Micro TM160 Thermal Imaging Monocular 160×120

(1 customer review)

$399.00

In stock

SKU: 3093251001AM10 Categories: , , , Tags: , , ,

AGM Asp Micro TM160

The AGM Asp Micro TM160 is an unbelievable unit at an unbelievable price. This handheld thermal monocular is equipped with a 160×120 infrared detector and a 720×540 LCOS display. It supports functions of observation, highest temperature target tracking, distance measurement, Wifi hot spot, and so on. The high sensitivity built in thermal detector gives you with clear view even in total darkness. The monocular is mainly for scenarios such as patrolling, law enforcement, search and rescue, and Hunting

AGM Asp Micro TM160 Features

Distance Measurement

The device realizes distance measurement function after marking the top and bottom of target, and input the target height.

Hot Spot Mark

Detects and marks the hot spot of highest temperature.

Mode Switch

Device supports pallet switch and distance measurement.

Storage

Built in memory for video recording and snapshots.

Digital Zoom

Device supports 1×, 2×, and 4× digital zoom.

Wifi Hot Spot

Device can take snapshots, record videos, and set parameters via APP after being connected to your phone.

160×120 resolution, high sensitivity detector

Adaptive AGC, DDE, 3D DNR

720×540 resolution LCOS display

Built in rechargeable Lithium battery

Wifi hot spot

Type C interface

Limited 3-Year Warranty »


Specifications

Digital Magnification 0.5x – 2x
Detector type Vanadium Oxide Uncooled Focal Plane Arrays
Response Waveband 8μm to 14μm
FFC (Flat Field Correction) Auto, Manual, External Correction
Highest Temperature Spot Tracking Yes
Standby Mode Yes
Refresh rate Sensor 25 Hz / OLED 50 Hz
Aperture F1.1
Resolution 160×120
Recognition (Vehicles: 1.4×4.0m) – 153m/yd (Humans: 1.8×0.5m) – 50m/yd
Detection Range (Vehicles: 1.4×4.0m) – 611m/yd (Humans: 1.8×0.5m) – 250m/yd
Identification Range (Vehicles: 1.4×4.0m) – 76m/yd (Humans: 1.8×0.5m) – 25m/yd
NETD less than 35 mk (@25°C), F#=1.1
Lens (focal length) 6.2 mm
Field of view (H × X) 15.61° × 11.74° (H × V)
Digital zoom 2×, 4×, 8×
Display 720×540, 0.2 inch, LCOS
Storage Built-in memory module (8 GB)
Record Video On-board video recording
Capture Snapshot Yes
Battery Type Built-in rechargeable Lithium battery
Wi-Fi Yes
Battery Operating Time Up to 10 hours
Battery Capacity Display Yes
Power supply 5 VDC/2 A, 1.5 W
Operating Temperature Range -20°C to 55°C (-4°F to 131°F)
Weight 270 g (0.6 lb)
Overall Dimensions 161 × 61 × 57 mm (6.3 × 2.4 × 2.2 in)
Protection Level IP67
Magnification 0.5x

 


 

 


 

 


 

 


 

1 review for AGM Asp Micro TM160 Thermal Imaging Monocular 160x120

  1. Adrian Trbovich (verified owner)

    I needed a thermal imager to help locate hogs in our mountain terrain, which is why I did not go with NV (lots of brush/trees). After much researching and debating, I decided to go with the TM160 as our shots in the mountains are usually sub 50 yards.

    This unit fit the bill perfectly for my needs. Keep in mind the resolution is not super clear but this is an entry model and not meant for long distances. My current setup is to use this for heat signature ID, confirm with my weapon light that has a green filter and take the shot if a hog.

    My first unit had an issue charging but Kenzies Optics took care of me with no questions. The replacement has been working great and is used quite a bit in the field.

Add a review

Your email address will not be published. Required fields are marked *