Free shipping on orders $199 & over!

Free shipping on orders $199 & over!

Sale!

Elcan SpecterDR Dual Role 1x-4x Optical Sight – Multiple Options

$2,099.00

SKU: N/A Category: Tags: , ,

Available Options:

Elcan SpecterDR Dual Role 1x-4x Optical Sight

The Elcan SpecterDR 4x- 1x Dual Role Optical Sight was designed to be the first truly dual field of view combat optical sight. The 1x-4x sight offers the best single solution for both Medium Range and CQB engagements and is designed to withstand the rigors of modern professional use. It switches instantly from a 4x magnified sight to a 1x CQB sight with the throw of a lever. Unlike zoom sights, the Elcan SpecterDR offers an optimized optical path and identical eye relief in both 4x and 1x modes.

Depending upon the situation, the user may adjust the sight to illuminate the crosshair or just a brilliant red dot in the center. In 1x mode, the SpecterDR has by far the largest field of view in the industry. In 4x mode the Elcan SpecterDR Dual Role 1x-4x Optical Sight offers a generous field of view, long eye relief, and ELCAN’S legendary crystal clear image. The optical housing has a 32mm objective lens and an 8mm diameter exit pupil, which provides excellent vision in low light levels. It also provides for rapid target acquisition and identification at short, intermediate, and long ranges. The sight incorporates LED’s for red dot and reticle illumination under CQB or low light conditions. The ballistically compensated reticle consists of a cross hair with horizontal stadia lines for shooting at various ranges.


Specifications

Magnification 1x-4x
Length 153 mm nominal
Width 74 mm nominal
Height 78 mm nominal
Weight 660 g nominal
Reticle Dual thickness ballistic crosshair with user selectable red dot, VSOR rangefinder, and area fire circles.
Aiming Dot Diameter 1.5 MoA @ 4x

6 MoA @ 1x

Ballistic Correction Dual thickness ballistic crosshair with user selectable red dot, VSOR rangefinder, and area fire circles.
DFOV14-C1 CX5395 reticle: 100-600 m for 5.56 carbine, 700-1000 m for 5.56 mm LMG
DFOV14-C2 CX5396 reticle: 100-600 m for 7.62 rifle, 700-1000 m for 7.62 mm LMG
CQB Offset <44 mm @ 60 m
Field of View 26 deg @ 1x
6.5 deg @ 4x
FoV @4x 11.4 m @ 100 m

(34.2 ft @ 100 yds)

FoV @1x 48.8 m @ 100 m

(146.3 ft @ 100 yds)

Illumination Source Battery powered LED
Crosshair Illumination 5 settings AN/PVS-22 compatible
Red Dot Illumination 5 settings AN/PVS-22 compatible
Eye Relief 70 mm
Entrance Pupil 32 mm
Exit Pupil 8 mm
Nominal Focus 150 m @ 4x

70 m @ 1x

Fixed Focus range 20 m to infinity
Battery Type DL 1/3N (3v Lithium)
Battery Life 600 hours minimum 3000 hours average
Exterior Finish Hard anodized aluminum gray/black color
Adjustment Resolution 0.5 minute of angle
Adjustment Range 120 minutes of angle
Base Requirement Mil-Std-1913 ‘Picatinny Rail’
Attachment ARMS Levers
Waterproof 66 ft for 2 hours
Shockproof 450 g’s

SpecterDR Quick Zero Guide

For detailed zeroing information please refer to the user’s manual.

The following procedure is provided for users familiar with optical combat sight zeroing.

1. Set the magnification to 4X when zeroing!

2. Azimuth zeroing uses the windage screw found at the front of the mount. Rotate the front left windage screw clockwise to move the point of impact to the left; counter clockwise to move to the right. Each click of the windage screw moves the point of impact by one-half MOA (approximately 1/2” at 100 yards). Figure 2-4

3. Elevation zeroing uses the elevation dial the bottom rear of the mount. Unlock the zeroing lock (silver tab) by raising it up as far as it will go. Be sure that the lock pin at the bottom of the zeroing lock is fully disengaged from the elevation dial.

4. Adjust the elevation dial as required. Each click of the elevation dial moves the point of impact by one-half MOA (approximately 1/2” at 100 yards). Turn the dial to the Right to Raise the point of impact, turn to the Left to Lower the point of impact.

When satisfied with elevation zero, lower the zeroing lock (silver tab) fully to lock the elevation zero at its current setting.



Reviews

Be the first to review “Elcan SpecterDR Dual Role 1x-4x Optical Sight – Multiple Options”

Your email address will not be published. Required fields are marked *