Free shipping on orders $99 & over!

Free shipping on orders $99 & over!

Vortex Fury HD 10×42 Laser Rangefinder Binocular


High quality optics and long-distance ranging capability come together in our all-new Fury™ HD 10×42 Laser Rangefinding Binocular. Convenience, speed, efficiency, and valuable dual-purpose functionality—all the advantages of a high-definition binocular perfectly paired with an angle compensated rangefinder. Right side controls are simple to use and easily manipulated with a single hand – leaving your other hand free to hold your bow, rifle, or other important piece of equipment.

Out of stock

Email when stock is available

SKU: LRF300 Category: Tags: , ,


XR Lens Coatings Vortex proprietary XR anti-reflective coatings, fully multi-coated on all air-to-glass lens surfaces, increase light transmission for maximum brightness.
Phase Correction Used on roof prism models only—coating enhances resolution and contrast.

                             CONSTRUCTION FEATURES

Roof Prisms Valued for greater durability and a more compact size.
Fogproof Nitrogen gas purging guarantees superior fogproof and waterproof performance.
Rubber Armor Provides a secure, non-slip grip, and durable external protection.

                                    CONVENIENCE FEATURES

Multi-Position Eyecups Twist up and down to precise, intermediate settings to maximize custom fit for comfortable viewing with or without eyeglasses.
Illuminated Right Barrel Display Can be set to yards or meters.
Right Side Controls Simple to use and easily manipulated with a single hand – leaving your other hand free to hold your bow, rifle, or other important piece of equipment.
Tapered Eyecups Fit naturally for greater viewing comfort.
Center Focus Wheel Adjusts the focus of both binocular barrels at the same time.
Left Eye Diopter Adjusts for differences in a user’s eyes. Located by the center focus wheel.
Tripod Adaptable Compatible with a tripod adapter, allowing use on a tripod or car window mount. Adapter sold separately.

                                   PERFORMANCE FEATURES

Intuitive Display Easy-to-use menu with a simple, clean display. Choice of yards or meters.
HCD Horizontal Component Distance (HCD) mode for angle compensated ranging.
LOS Line of Sight (LOS) mode displays actual line of sight range.
Scan This feature displays continual distance readings when panning across a landscape or tracking a moving animal.
Ranging Format Range in yards or meters.


Magnification 10x
Lens Diameter
42 mm
Eye Relief 16 mm
Exit Pupil 4.2 mm
Linear FOV 314.4-6 ft
@ 1000 yds
Close Focus 20 feet
54-69 mm
Height 5.75 inches
Width 5.9 inches
Weight 31.8 ounces
1600 yds
1000 yds

The FuryTM HD is an extremely effective angle-compensated laser rangefinder binocular intended for hunters, archers and shooters. The primary HCD (Horizontal Component Distance) mode provides key angle compensated range information required by the vast majority of rifle and bow shooters in a simple, quick-to-read display.

The Fury also has a LOS (Line of Sight) mode and Scan feature, along with adjustments for reading in yards or meters and setting the brightness of the display.

Basic Operation

Adjust the eyecups

The eyecups on a Fury HD twist up and down so any viewer can see the full field and enjoy comfortable viewing—with or without eyeglasses.

When not using eyeglasses or sunglasses, keep the eyecups fully extended. For best viewing when wearing eyeglasses, twist eyecups down.

Adjust the interpupillary distance

The interpupillary distance (IPD) is the distance between the centers of the left and right eye pupils. Match the IPD of your eyes to that of the binocular so you see a single image free of shading. Rotate the binocular barrels inward or outward to line your eyes up with ocular lenses.

Properly focus the binocular

For the best views, follow this two- step process to properly adjust the center focus and diopter. Choose an object that is about 20 yards away from you and stay in the same spot until you have adjusted the binocular for your eyes.

1. Adjust the center focus—start by closing your left eye or covering the left objective lens with your hand. Focus your right eye on the object and adjust the center focus wheel until the image is in focus. Leave the center focus in this position as you adjust the diopter.

2. Adjust the diopter—start by closing your right eye or covering the right objective lens with your hand. Look through your left eye, adjust the diopter so that the object is in focus. Make note of this diopter setting in case you need to set it again. From this point on, you will only need to use the center focus wheel.

Properly focus the rangefinder display

This process is similar to focusing the binocular.
1. Power up the binocular and close your left eye.

2. View the rangefinder display with your right eye.

3. Use the reticle focus adjustment ring to bring the display into sharp focus.

Once this is done you will not have to refocus the rangefinder display again.

Mode Selection

Your Fury is factory set to the angle compensating HCD mode, yards, and medium brightness. For most users, these are the preferred settings.

To change modes, press the Measure button to power on and then press the Menu button for at least four seconds. Once the Mode Selection screen displays, release the button.

As you progress through Mode Selection, you may exit at any time and save your settings by pressing and holding the Menu button for at least four seconds—the Fury will return to power-up condition.


With the Fury powered up, position the laser aiming circle on the target object and press and release the Measure button to get the distance measurement. If the laser is not able to range due to the reflectivity of the target, you will see a display similar to that shown here. To range a new target, simply re-aim and press the Measure button again.

Scan Ranging

Activate Scan Ranging by pressing and holding the Measure button down.

Keeping the button depressed will continuously measure distance as you pan back and forth across target objects. The aiming circle will blink as you pan. Releasing the Measure button will return laser to the Power Up Condition.

Ranging Mode Explanations

The Fury provides two range modes: HCD (Horizontal Component Distance) and LOS (Line of Sight). Both modes offer a Scan feature.

HCD Mode

The HCD range display is intended to be the primary mode—used for most rifle and archery shooting applications. The yardage number displayed is the critical horizontal component distance.

Using the HCD Mode

Use the HCD range mode in the following situations:

• Rifle shooting on level ground at any range.

• Rifle shooting out to ranges of 800 yards with mild slopes (less than 15 degrees).

• Rifle shooting out to ranges of 400 yards with mod- erate slopes (15 to 30 degrees).

• For all archery shooting.

The displayed HCD yardage number is corrected for shot angle and needs no extra user input; shooters simply use the appropriate level ground bullet drop and wind adjustment for the range displayed and shoot. Archers use the appropriate level ground sight pin for the range displayed and shoot.

LOS Mode

The LOS (Line of Sight) mode is intended for rifle shooters who are using slope correcting ballistic drop data cards, ballistic cell phone applications, or other devices with ballistic programs and who are shooting at distances beyond 500 yards and with slopes greater than 15 degrees. Most shooters and archers will not need the LOS mode.

The range number displayed in LOS mode is the actual line of sight range with no ballistic correction for slope. Most of the commonly used ballistic devices can provide independent slope correction for bullet drop data and require actual line of sight range input. Using the LOS range when calculating bullet wind drifts under these steep slope/long range conditions will provide a higher degree of accuracy than using the HCD range.

To use, simply input the LOS range number into the electronic device or use the LOS range when referencing ballistic drop cards with slope correction

LOS Mode – Using the INC Number

When in LOS mode, an additional number is displayed above the yardage number. This number is slope incline shown in degrees.

The slope incline number can be entered into ballistic programs or field cards to help calculate precise bullet drops in mountainous terrain.

Rangefinding Tips

Rangefinding binoculars work by emitting a brief pulse of light aimed at a target object. Distance is determined by the amount of time taken for the light to emit and return to the laser’s internal receiver. A laser’s ability to read range can be affected by many things—mostly relating to the target objects. Under ideal conditions, expect to range a large reflective object out to 1600 yards and deer-sized game out to 1000 yards.

Laser Performance Tips

  • Light colors will usually reflect the laser pulse better than dark ones. An exception would be snow, which can be difficult to range.
  • Shiny, reflective surfaces will usually reflect the laser pulse better than dull, textured surfaces. Animal hair will not reflect as well as a hard sur- face.
  • Ranging while under cloud cover can improve laser performance compared to ranging while under bright sunny conditions.
  • Solid objects, such as rock piles, will reflect the laser pulse better than less dense items such as bushes.
  • Flat surfaces perpendicular to the laser pulse will reflect better than curved surfaces or surfaces angled in relation to laser pulse.
  • Ranging over water can sometimes cause false reflections and readings.
  • At longer distances, larger objects will be easier to range than small objects.
  • If you are having difficulty ranging an animal or object, try ranging a different nearby object or use the Scan feature to pan back and forth while watching for changes in range number.

Lens Care

Maintain the optical brilliance of the binocular by keeping lens surfaces free of dirt, oils, and dust. Make use of the provided eyepiece and objective lens covers to protect the lenses when not viewing. Then, store in its carry case between viewing sessions.

In order to enjoy the best views through your binocular, take time to regularly clean the exterior lenses:

1. Remove any dust or grit from lenses before wiping. Use a can of pressurized air, soft camel hair brush, or an acrylic optical brush.

2. Clear lenses of smudges, fingerprints, or eyelash oil. Fog the lenses with your own breath, then use a non-abrasive lens cloth to clean the lenses. Alternately, use a lens cleaning fluid and optical paper to clean lenses.

The VIP Warranty

We build optics based on our commitment to your absolute satisfaction. That’s why Vortex products
are unconditionally guaranteed. We make this Very Important Promise to you—a Very Important Person.

Rest assured that in the event your binocular becomes damaged or defective, Vortex Optics will repair or replace the binocular at no charge to you. Call Vortex Optics at 800-426-0048 for prompt, professional, and friendly service.

The VIP Warranty does not cover loss, theft, deliberate damage, or cosmetic damage that does not hinder the performance of the product.


Only logged in customers who have purchased this product may leave a review.