1-8x24mm Vortex Strike Eagle Riflescope

/, Rifle Scopes, Vortex, Strike Eagle/1-8x24mm Vortex Strike Eagle Riflescope

1-8x24mm Vortex Strike Eagle Riflescope


In stock (can be backordered)

Optimize the versatility, functionality and quick-handling attributes of your AR-15 with the Strike Eagle 1-8×24. A true 1X on the low end of its 8X zoom range, the Strike Eagle 1-8×24 intrinsically adapts to a wide range of scenarios, letting shooters engage targets from point-blank out to extended ranges. Home defense, competition, recreational shooting, feral hog “removal” and any task between, this scope is up for whatever you want to throw at it. And it does so at a price that will have you feeling like you ripped us off.

High quality, fully multi-coated lenses serve up a sharp image, impressive sight picture and optimal low-light performance. The illuminated, glass-etched BDC reticle subtends with popular .556 cartridges. Center target dot with surrounding halo promotes instinctually fast target acquisition and shot execution. Take the performance of your AR to new heights with the Strike Eagle 1-8×24.

In stock (can be backordered)


L1 L2 L3 L4 L5
10 2.8 1.9 6.4 3.7
H1 H2
1.2 1.7


Fully Multi-Coated
Increases light transmission with multiple anti-reflective coatings on all air-to-glass surfaces.

Second Focal Plane Reticle
Scale of reticle maintains the same ideally-sized appearance. Listed reticle subtensions used for estimating range, holdover and wind drift correction are accurate at the highest magnification.

Glass-etched Reticle
Protected between two layers of glass for optimum durability and reliability.

Illuminated Reticle
Provides precise aiming under low-light conditions.


Tube Size
30 mm diameter.

Single-Piece Tube
Maximizes alignment for improved accuracy and optimum visual performance. As well as ensures strength, durability and quality of the waterproofing.

Aircraft-Grade Aluminum
Constructed from a solid block of aircraft-grade aluminum for strength and rigidity.

O-ring seals prevent moisture, dust and debris from penetrating the riflescope for reliable performance in all environments.

Nitrogen gas purging prevents internal fogging over a wide range of temperatures.

Rugged construction withstands recoil and impact.

Hard Anodized Finish
Highly durable low-glare matte finish helps camouflage the shooter’s position.

Capped Reset Turrets
Allow re-indexing of the turret to zero after sighting in the riflescope. Caps provide external protection for turret.


Fast Focus Eyepiece
Allows quick and easy reticle focusing.


Magnification 1-8x
Lens Diameter
24 mm
Eye Relief 3.5 inches
FOV 116.6-14.4
feet/100 yards
Tube Size 30 mm
Turret Style Capped
1/2 MOA
Travel per
44 MOA
Max Elevation
100 MOA
Max Windage
100 MOA
100 yards
Length 10 inches
Weight 16.5 ounces

Standard BDC Technique

For best results, most 5.56mm/.223 caliber rifles can be zeroed in at 50 yards using the center dot. The 50 yard zero will closely correspond to the recommended 200 yard zero. 7.62mm/.308 caliber rifles can be initially zeroed at 30 yards, again closely corresponding to recommended 200 yard zero.

Once the rifle has been sighted in, the lower sub-crosshairs can be used
as aiming points at the corresponding distances listed on page 5. For most popular rifles and loads, the sub-crosshairs will provide accuracy within 0–3 inches of your aiming point.

Note: If you wish to get the very best accuracy from the AR-BDC2 reticle or work with loads and zero’s other than those listed here, you can custom match the exact ballistics of your particular load to the drop hashmarks of the reticle using ballistic programs such as Vortex’s LRBC (Long Range Ballistics Calculator).

Standard Bullet Drop for Popular 5.56 mm / .223 Loads

5.56 mm / .223 55 – 77 grain boat tail bullets 2700 – 3000 FPS muzzle velocity

Center dot zeroed 50/200 yards

Standard Bullet Drop for Popular 7.62 mm / .308 Loads

7.62 mm/.308 Winchester 168 grain boat tail bullets 2650 FPS muzzle velocity

7.62 mm/.308 Winchester 175 grain boat tail bullets 2600 FPS muzzle velocity

Center dot zeroed 30/200 yards

Note: It is important to understand that the previously-listed subtensions and yardages are designed to work with the riflescope set at the highest magnification. The center dot zeroed at 30/50/200 yards can always be used at any magnification.

Additional information

Weight 1.0 lbs


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.