Nightforce ATACR 1-8x24mm
The Nightforce ATACR 1-8x24mm is designed and built to be the ultimate low power variable scope. It includes pristine ED glass, bright daylight illumination, an intelligent reticle, very low profile adjustments and bomb proof reliability, with a field of view at 1x equivalent to open sights…but vastly more precise. The Nightforce ATACR 1-8×24 F1 measures just over 10 inches in length and weighs 21 ounces, with a streamlined profile. The daylight visible, center red dot allows for rapid engagements like a red dot sight.
Unlike a red dot, however, the 1-8x provides up to 8x zoom to help locate, identify and engage targets at the maximum effective range of most rifles. The intelligent FC-DM first focal plane reticle provides precise hold and hold off points. The low profile turrets are capped to prevent accidental adjustment and offer true .1 Mil-Radian adjustment. To aid in fast magnification adjustments, an integrated Power Throw Lever (PTL) is included. The ATACR 1-8x24mm is available in a Black or Dark Earth finish.
Nightforce ATACR 1-8x24mm Features
Low profile, capped adjustments .1 Mil-Radian increments
Integrated power throw lever
Daylight illuminated reticle; “Off” settings between brightness settings
34 mm body tube for superior strength and maximum adjustment range
Two piece locking diopter
Nightforce ATACR 1-8 FC-DM Reticle
The first focal plane FC-DM reticle is optimized specifically for low power variable scope use. At low power, the daylight bright center dot and segmented circle are visible under the brightest of conditions, allowing for fast and accurate target acquisition.
The clean .5 and 1 Mil-radian (Mil) markings provide easy hold points for moving targets, wind and elevation hold overs, or for reference markings. For more precise engagements and use at longer ranges, the additional features of the reticle provide fast and easy elevation and windage holds. The FC-DM incorporates reference dots spaced every 1 Mil down to 10 Mils, allowing for easy hold-o s and shot corrections.
Designed specifically for the ATACR 1-8×24 F1 scope, this reticle is perfectly suited for most any shooting application including close quarters, hunting, competition, and general shooting.
For more reticle information click here »
Nightforce ATACR 1-8 FC-DMX Reticle
Nightforce has maintained the daylight bright illumination that allows for use in any conditions at 1x or high magnification. The FC-DMx segmented circle has been increased in diameter from 2MRAD to 4MRAD and made thinner to maintain the same illuminated area. This open center area allows the user a clear view of the target to make fast, unobstructed shoot/no-shoot decisions. The 0.2MRAD (0.7MOA) center dot provides a precise aiming point when at high magnification. A 1MRAD resolution aiming grid allows for simultaneous holds (elevation and wind) to 10MRAD of elevation. The line labels are placed on both the left and right for fast acquisition and are located to the outside for a clear view of the target within the grid. The unobstructed view of the target, daylight visible illumination, and intuitive labeling of the FC-DMx provide the user with increased capability for both close and far targets.
For more reticle information click here »
Specifications |
|
| Focal Plane | First |
| Objective Outer Diameter | 24 mm |
| Exit Pupil Diameter | 1x: 11.26 mm
8x: 3.19 mm |
| Field of View @100 yards | 1x: 96.1 ft
8x: 13.1 ft |
| Field of View @100 meters | 1x: 32.0 m
8x: 4.4 m |
| Eye Relief | 95 mm
(3.74 in) |
| Internal Adjustment Range | e: 30 Mil
w: 30 Mil |
| Click Value | .1 Mil-rad |
| Parallax Adjustment | Fixed 125 yd |
| Tube Diameter | 34 mm
(1.34 in) |
| Eyepiece Outer Diameter | 46 mm |
| Overall Length (inches/mm) | 10.06 in
(255.5 mm) |
| Weight (ounces/grams) | 21 oz
(595 g) |
| Mounting Length (inches/mm) | 5.67 in
(144 mm) |
| PTL (Power Throw Lever) | Standard |
| Reticles Available | FC-DM / Daylight visible, adjustable illumination
FC-DMX |
| Elevation Feature | Capped, low profile |
Reviews