Description

BoBro Trijicon MRO Mount

The BoBro Trijicon MRO Mount was designed with the BoBro Lever Auto Compensation, Reduced or the BLACR. It is a smaller version of the BLAC mechanism. BoBro used the more compact BLACR because the MRO optic body is compact, and the BLACR system goes well with this configuration.

The base is the same height as the factory low, and mounts the optic as low as possible. Applications include shotguns and AK pattern weapons. The Co-Witness riser puts the optic at 1.465″. This will put the MRO at the same height as the iron sights on the M16/AR15 family. The Lower 1/3 puts the optic at 1.765″ This has the MRO running a little higher. Because the system is modular, you can configure any of these heights, at any time. If you just have the base unit, and then want to change the height, then just order a riser. BoBro provides all the tools and screws needed.

Bobro Engineering guarantees that the product shall be free from defects in materials or workmanship within the terms of the warranty. If the product is found by Bobro Engineering to be defective, it will be repaired or replaced at the option of Bobro Engineering free of charge.