Description

TriggerTech Special Trigger for Tikka T3, T3x, and T1x – Right Handed

The all new TriggerTech Special Trigger for Tikka T 3s and T1x is a drop-in trigger ready to be swapped out with your OEM one. The TriggerTech Special Trigger features either a curved or fat face, with an adjustable pull length of 1-3.5 pounds. The TriggerTech Special Trigger is a single-stage trigger with the safety facing the top on the right side.

Due to the exceptionally crisp break, most shooters report the pull weights feeling ~0.5lbs lighter than a friction based trigger of the same measured weight. As Frictionless Release Technology does not rely on coating, polishing or lubricating the key engagement surfaces, trigger pulls will be more consistent from shot to shot.

All pull weights and measurements are approximate. Pull weights of TriggerTech Triggers are directly impacted by firing pin spring weight. Overweight firing pin springs may cause pulls weights to vary above the advertised range.

TriggerTech warrants to the original retail purchaser that this TriggerTech product will be free from manufacturing and handling defects for thirty days after the original sale of the product, and from manufacturing defects for the life of the product. This warranty only applies if this product was manufactured and sold by TriggerTech. This warranty excludes conditions caused by excessive wear and tear, aggressive handling, unreasonable use, modifications, alternation, tampering, misuse, improper installation, or other factors outside TriggerTech’s control. Modifying the product in any way VOIDS this warranty. This limited warranty does not extend to future performance.