Arisaka Offset Optic Plate
The Arisaka Offset Optic Plate is CNC machined from 6061-T6 aluminum and MIL-A-8625 Type III hard coat anodized. It includes new screws (where needed) which Arisaka recommends using over the OEM screws, as long as the lengths are appropriate. The plate is available in a variety of different models, and is made in the USA.
A complete offset optic mount requires both a base and one optic plate. This product listing is only for purchasing spare plates.
Do not exceed 20 inch lbs of torque on the screws that attach the optic to the plate.
Standard height (for 1.5″ to 1.8″ scope mounts)
|Plate 1||Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III|
|Plate 2||Trijicon RMR, SRO, Holosun 407C, 507C, 508T|
|Plate 3||C-More, Vortex Razor, SIG Romeo 3|
|Plate 4||Leupold Delta Point Pro, JPoint, Shield RMS|
|Plate 5||Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530|
|Plate 6||Aimpoint Acro|
|Plate 13||Holosun 509T|
|Plate 15||SIG Romeo 1 and Romeo 1 Pro|
Tall height (1.9″ to 2.2″ scope mounts)
|Plate 7||Docter, Eotech MRDS, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III|
|Plate 8||Trijicon RMR, SRO, Holosun 407C, 507C, 508T|
|Plate 10||Leupold Delta Point Pro, JPoint, Shield RMS|
|Plate 11||Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530|
|Plate 12||Aimpoint AcroPlate 14Holosun 509T|
|Plate 16||SIG Romeo 1 and Romeo 1 Pro|
|Plate 20||Trijicon MRO|