Swampfox Hostile Engagement Mount

The Swampfox Hostile Engagement Mount are available in 30mm or 34mm ring size and was designed to extend the center of the forward ring 2″ beyond the edge of the 1913 Picatinny mounting surface. It is compatible with LPVOs with generous eye relief, like the Swampfox Tomahawk and Arrowhead. The low profile T25 Torx bolts provide more clamping power than thumb nuts, while integrated recoil lugs ensure everything stays locked down. Built in RMR footprint mounts at 45⁰ angles are threaded 3.5 x 0.6 for installing an offset back up dot sight like Kingslayer, Liberty or Justice.

Swampfox Hostile Engagement Mount Features

7075 Aluminum Construction

Scratch Resistant Hardcoat Oxidized Finish

CNC Machined

Integral 45-degree RMR Footprint Optic Mounts

T10 Star ring cap screws: 10 inch-pounds torque

Picatinny T25 Star Mount Bolts: 25 inch-pounds torque

Diameter Options: 30mm, 34mm

Centerline Height Options: 1.60”

Forward offset: 2” From Front of Mount to Centerline of Front Ring

Only 8.25 ounces.

1.60″ CENTERLINE HEIGHT

Standard height for AR-15 and large frame AR rifles

1.60″ centerline height places optic reticle just above AR-15 iron sights (irons are 1.435″ tall)

A standard setup for rifles with “in-line” stocks at the same level as the receiver rail

Will work with precision scopes featuring large 56mm objective lenses

Rifles with stocks located lower than the receiver rail may need a cheek piece added

Only 8.25 ounces