Description

Warne Maxima Ruger QD Scope Rings

The Warne Maxima Ruger QD Scope Rings are designed in two different styles. The fits the Ruger #1 receiver design, which included the Blackhawk and Mini 14 models. Second design fits the tapered receiver style like the Ruger M77 Hawkeye and Super Redhawk. The Ruger M77 style rings are packaged as two different heights to accommodate the tapered mounting surface.

Maxima Ruger rings are packaged in model specific configurations to fit Ruger’s proprietary dovetail. They are solid steel, vertically split ring that handles even the most punishing recoil, or large, heavy scopes.

Warne Maxima Ruger QD Scope Rings

Attaches to firearms’s dovetail.

Return to Zero Guaranteed, quickly detach and reattach the Maxima QD rings with no loss of zero.

Ruger specific scalloped recoil control key for positive engagement of ring to receiver dovetail.

Rings securely mount around scope using 4 Torx style T-15 socket cap screws.


Installation Instructions

Always verify that your firearm is UN-LOADED before performing any service on it. Warne recommends that you loosely assemble rings and scope onto firearm prior to final mounting to verify eye relief and ring spacing.

  1. Remove the 4 screws from both rings.
  2. Place the scope in the ring halves and re-insert recoil key (CZ & Ruger rings do not have specific recoil keys and utilize an integrated recoil management system)
  3. Start all 4 screws on both rings and tighten only the bottom screws to 25in/lb* max.
  4. Place rings onto the bases with the recoil keys  in the slots and push each ring towards the muzzle to seat the recoil key
  5. Tighten QD lever, thumb & forefinger tight***. (there is no need to over tighten QD lever)
  6. Adjust eye relief and level the reticle
  7. Once both are correct, tighten the top screws on both rings to scope manufacturers’ recommended torque rating**, maximum of 25 in/lb.
  8. After tightening, pull QD levers out to index them to the desired position.

*Torque Spec are for dry threads, DO NOT USE THREAD-LOCKER COMPOUND

**Many scope manufacturers’ have established specific torque ratings for their scope and you must follow their recommended torque.

***Please refrain from tightening QD lever with any hand tool as it is not required.

IMPORTANT: NEVER OVER TIGHTEN ANY BASE OR RING SCREW. NEVER ATTACH A SCOPE IF THE OBJECTIVE TOUCHES THE BARREL OR CAUSES INTERFERENCE WITH THE BOLT, SAFETY OR CYCLING OF THE ACTION. ALWAYS FOLLOW THE FIREARM OR SCOPE MANUFACTURERS’ RECOMMENDED TORQUE SPECIFICATIONS. YOU ARE RESPONSIBLE FOR YOUR OWN GUNSMITHING METHODS.

            ⇒ If you are unsure or do not have the proper tools, please contact a gunsmith for assistance, Warne will not be held liable for stripped/damaged receivers or scopes.


 


 


 

More from Warne

Additional information

Weight N/A
Gun Model

M77

Ring Size

1 in., 30mm

Ring Height Options

High, Medium

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.